Configuration; Overview; Saving And Restoring Configuration Options - Paradyne Hotwire 8335 User Manual

Configuration

Overview

This chapter provides instructions on how to access the system for the first time
and perform initial setup procedures. These procedures may include:
In cases where there is a substantive difference between the screens for the
different card models, an example for each card model is shown. For most screens
the only difference is the model number and number of ports displayed in the
message area.

Saving and Restoring Configuration Options

If you have a saved configuration options file you would like to download to the
card, or if you would like to save a copy of the current configuration file, use the
NVRAM Configuration Loader screen. See
Configuration
If you have altered configuration options in error and would like to ensure that you
are using factory default configuration options, use the Clear NVRAM screen to
restore them. See
8335-A2-GB20-A0
Entering Card Information
Setting Spectrum Management (Models 8355, 8375, and 8385)
Configuring the DSL Ports
Configuring the ATM Physical Layer (Models 8335, 8365, and 8385)
page 3-28
Configuring ATM Parameters
Configuring ATM Cross Connections
Configuring ATM Traffic Profiles
Clearing Cross Connections
Configuring Rate Shaping (Models 8335, 8365, 8385)
Entering Service Node Management Configuration Information (Models 8335
and 8385) on page 3-46
in Chapter 6, Maintenance Procedures.
Clearing NVRAM
March 2005
on page 3-2
on page 3-8
on page 3-30
on page 3-32
on page 3-36
on page 3-41
Uploading and Downloading a
in Chapter 6, Maintenance Procedures.
3
on page 3-4
on
on page 3-42
3-1