Trap Managers; Snmp Traps - Paradyne Hotwire 8335 User Manual

SNMP Traps

Trap Managers

SNMP traps are sent to trap managers whose addresses are entered on the
SNMP Communities/Traps configuration screen of the MCP. See the
Management Communications Controller (MCC) Card, IP Conservative, User's
Guide
SNMP Traps
Traps are configured via a Telnet or terminal session. See the
Management Communications Controller (MCC) Card, IP Conservative, User's
Guide
Table A-1, SNMP
Table A-1. SNMP Traps (1 of 6)
Event
Cold start(0)
Warm start(1)
LinkDown(2)
LinkUp(3)
adslAtucPerfLofsThreshTrap
adslAtucPerfLossThreshTrap
8335-A2-GB20-A0
for information about management domain configuration.
for information about enabling and routing traps.
Traps, shows the traps supported on the ATM Line Cards.
Description
Card has been reset and performed a
cold start.
Power on reset.
One of the communication interfaces has
failed.
One of the communication interfaces has
come up.
Loss of Framing 15-minute interval
threshold reached.
Loss of Signal 15-minute interval
threshold reached.
March 2005
A
Hotwire
Hotwire
Variable Bindings
None
ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
ifIndex (RFC 2863)
adslAturPerfCurr15MinLofs
adslAturThresh15MinLofs
ifIndex (RFC 2863)
adslAtucPerfCurr15MinLoss
adslAtucThresh15MinLoss
A-1