Paradyne Hotwire 7976 Installation Instructions Manual page 17

"
Procedure
The AutoRate option is defaulted to Disable. To enable AutoRate:
Table 10 provides the maximum payload rates achievable for each DSL line rate
and the number of time slots required to achieve that payload rate depending on
whether you are using signaling (time slots 0 and 16) or data only (time slot 0).
Table 10. Fixed Rate Payload Rates and DSL Line Rates
7976-A2-GZ40-00
1. Position the cursor in the AutoRate field and press the spacebar.
The AutoRate field toggles to Enable and the DSL Line Rate field displays.
2. Enter a DSL Line Rate and press Enter.
Your payload rate is set to a default value of 1984. Use Table 10, Fixed Rate
Payload Rates and DSL Line Rates, to set your DSL Line Rate and Payload
Rate according to whether you are configured for Voice (signaling) or Data.
Voice Mode
(G.703 to G.703)
Maximum
DSL Line Payload
Rate (kbps)
Rate (kbps)
2064 1920
1552 1408
1040 896
784 640
528 384
400 256
March 1999
Data Mode
(G.703 to G.703)
Maximum
Time Payload Time
Rate (kbps)
Slots Slots
30 1984
22 1472
14 960
10 704
6 448
4 320
Data Mode
(G.703 to EIA-530)
Maximum
Payload Time
Rate (kbps)
Slots
31 1984 31
23 1536 24
15 1024 16
11 768 12
7 512 8
5 384 6
17