Paradyne 7974 Installation Instructions Manual page 5

LEDs
The following table contains a description of the LEDs on the Hotwire 797x Standalone
Termination Unit's front panel.
Label Color
POWER Green
ALARM Red
TEST Yellow
DSL Green
DSX-1 Green
DTE
G.703
* Slow Cycling: LED turns off and on in equal duration once per second.
Fast Cycling: LED turns off and on in equal duration 5 times per second.
Pulsing: LED turns off momentarily once per second.
LED is . . .* Indicating . . .
On Normal operation.
Off No power to the unit.
Slow Cycling Unit is in minimum mode and a download is
required.
On Device failure, or self-test has failed.
Off Self-test passed.
On Loopback test or 511 test pattern in progress.
Off No tests in progress.
Slow Cycling Self-test in progress.
On DSL link is up.
Off The DSL link is down.
Slow Cycling DSL training in progress.
Fast Cycling An OOF condition.
On DTE port is operational.
Off DSX-1: No signal on DTE port.
Sync DTE: Configured control leads (DTR/RTS)
are not asserted.
G.703: No signal on DTE port.
Slow Cycling DSX-1: Yellow Alarm Indication received.
Sync DTE: Not applicable.
G.703: Remote Alarm Indication received.
Fast Cycling DSX-1: OOF, LOF, EER, or AIS condition.
Sync DTE: Not applicable.
G.703: OOF, LOF, EER, or AIS condition.
5