Advertisement
Section 3
Section 2
Configure the Wireless PCI Adapter
To open the utility, go to Start > (All) Programs > AirLink101 300N Wireless
PCI Adapter > AirLink101 300N Wireless PCI Adapter.
Step 1
Go to the AP List tab, select the SSID (Network Name) of the wireless
network you wish to connect to, and click Connect.
Step 2
If encryption is not enabled for the selected access point / router, skip to
step 6. Otherwise, enter a Profile Name for your wireless setting and click Next.
Step 3
Verify that the Network Name matches the SSID of your wireless network
and click Next.
Advertisement
