Advertisement
Quick Links
Download this manual
See also:
User Manual
Quick Installation Guide
Wireless N PCI Adapter
Model # AWLH6075
Section 1
Install Wireless PCI Adapter
This Quick Installation Guide only provides the basic installation instructions.
For detailed installation instructions on advanced features, please refer to the
User's Manual that can be found on the provided CD.
Step 1.1
SWITCH THE COMPUTER OFF, remove the cover and insert the
wireless PCI adapter into an available PCI slot of your computer.
Step 1.2
Fasten the 2 antennas to the antenna connectors on the wireless PCI
adapter.
Step 1.3
To improve radio reception, please adjust antennas to the position
shown in the picture.
Ver. 1.0
Package Contents:
• Wireless N PCI Adapter
• 2 Antennas
• Driver & Utility CD
• Quick Installation Guide
Step 1.4
Switch on the computer.
Step 1.5
Click Cancel when you see the Found New Hardware Wizard.
(Windows XP)
(Windows
Vista)
Advertisement
Related Manuals for Airlink101 AWLH6075
Summary of Contents for Airlink101 AWLH6075
-
Page 1: Quick Installation Guide
Quick Installation Guide Wireless N PCI Adapter Model # AWLH6075 Package Contents: Section 1 Install Wireless PCI Adapter This Quick Installation Guide only provides the basic installation instructions. For detailed installation instructions on advanced features, please refer to the User’s Manual that can be found on the provided CD. - Page 2 Step 1.6 Insert the Installation CD in the CD drive. When the autorun screen pops up, select Install Utility and Driver. Windows Vista Users: When you get warning message(s), make sure that you click Allow to continue with the installation of the driver software. Step 1.7 Click Next.
-
Page 3: Connect To Wireless Network
Step 1.9 Click Finish and restart your computer as prompted. Step 1.10 You will see the Airlink101 Wireless Monitor pops up. Congratulations! The Wireless N PCI Adapter has now been successfully installed on your computer. Section 2 Connect to Wireless Network Note: If the Airlink101 Wireless Monitor does not open on your desktop, you can open the Airlink101 Wireless Monitor utility by double clicking on the Airlink101 Wireless Monitor Utility icon in the system tray at the bottom right-... - Page 4 Step 2.2 Type in the network key of your wireless network and click OK. Step 2.3 After the adapter connects to the wireless network successfully, a blue triangle will appear at the front of your wireless network. Troubleshooting 1. If you cannot open the wireless monitor utility, make sure that the PCI adapter is inserted firmly into the PCI slot.