0623 [Amount of Z-fold Skew Correction]
Adjust the striking amount of paper during Z-folding skew correction. [-] reduces the striking amount.
Specify this setting if the skew correction for z-folding causes a problem.
At the default value of "0.0", the sheets are brought against the guide at a distance of 7 mm. You can
reduce this value down to [-7.0] (0 mm) using [-].
This function can be used with Finisher or Booklet Finisher.
Setting Item
[Setting]
0624 [Amount of Z-fold Skew Correction: Reverse]
Adjust the reverse rotation amount of Registration Roller during Z-folding Skew Correction. [-] reduces
the reverse rotation amount.
Specify this setting if the skew correction for z-folding causes a problem.
At the default value of "0.0", the amount of reverse rotation is 3 mm. You can reduce this value down to
[-3.0] (0 mm) using [-].
This function can be used with Finisher or Booklet Finisher.
Setting Item
[Setting]
Default
Max.
Value
Value
0.0
0.0
Default
Max.
Value
Value
0.0
0.0
[Finishing: Finisher]
Min.
Step
Value
-7.0
0.5
Min.
Step
Value
-3.0
0.5
Unit
mm
Unit
mm
47