Table of Contents
Advertisement
6. Adjust the chain tension until the gap
between the
drive teeth and bar is
between 2.5 and 3.5 mm.
To increase the chain tension, turn the
chain tensioning screw clockwise.
To reduce the chain tension, turn the
chain tensioning screw counterclockwise.
NOTE: Frequently check the chain
tension while turning the chain tensioning
screw.
7. Tighten the sprocket cover screw.
ADJUSTING THE CHAIN TENSION
1. Remove the battery pack.
2. Loosen the sprocket cover screw.
14
Maintenance
6
7
1
2
2.5-3.5 mm
2
1
1
2
2
1
Advertisement
Table of Contents
