Table of Contents
Advertisement
3
2
2
Loosen the sprocket cover screw.
WARNING: Grip both handles with
the thumbs and fingers encircling the
handles. Ensure that the left hand is
holding the front handle so that the
thumb is underneath.
4
1
To increase the chain tension, turn the
chain tensioning screw clockwise. To
reduce the chain tension, turn the chain
tensioning screw counterclockwise.
NOTE: Frequently check the chain
tension while turning the chain
tensioning screw.
WARNING: Always hold the product
with the right hand on the rear handle
and the left hand on the front handle.
2.5-3.5 mm
NOTE: Adjust the chain tension until
the gap between the drive teeth and
bar is between 2.5 and 3.5 mm.
7
1
2
Start the product. Pull the trigger
release. Press the switch trigger.
Getting started
5
11
Advertisement
Table of Contents
