Ryobi RCS36X3550HI Original Instructions Manual

Ryobi RCS36X3550HI Original Instructions Manual

Cordless chainsaw
Hide thumbs Also See for RCS36X3550HI:

Advertisement

ORIGINAL INSTRUCTIONS
Cordless Chainsaw

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi RCS36X3550HI

  • Page 1 ORIGINAL INSTRUCTIONS Cordless Chainsaw RCS36X3550HI RCS36B35...
  • Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining this machine. Subject to technical modification.
  • Page 3 Keep cord away from heat, oil, sharp edges or WARNING moving parts. Damaged or entangled cords increase When using the product, the safety rules must be followed. For your own safety and that of bystanders, you When operating a power tool outdoors, use an must read and fully understand these instructions before extension cord suitable for outdoor use.
  • Page 4 and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Secure long hair so it is above shoulder level to prevent entanglement in moving parts. users. Maintain power tools. Check for misalignment or bystanders, children, and animals at least 15 m away binding of moving parts, breakage of parts and any other condition that may affect the power tool’s...
  • Page 5 a chainsaw while up in a tree may result in personal situations. injury. Only use replacement bars and chains specified Always keep proper footing and operate the by the manufacturer. Incorrect replacement bars and chainsaw only when standing on fixed, secure and level surface.
  • Page 6 installing or removing attachments – – – etc. The operator needs to be aware and in control of Chainsaw jackets for upper body protection – Do not cut with your body in line with the guide bar INSTRUCTIONS CONCERNING THE PROPER TECH- prevent the chain coming into contact with your head NIQUES FOR BASIC FELLING, LIMBING, AND CROSS- or body.
  • Page 7 second notch is being made. binding the chainsaw. 2. Felling back cut Cutting springpoles See page 17 - 18. See page 20. A springpole is any log, branch, rooted stump, or sapling higher than the horizontal notching cut. Keep the felling which is bent under tension by other wood so that it springs On a fallen tree, a rooted stump has a high potential of and falling in the wrong direction.
  • Page 8 in certain individuals. Symptoms may include tingling, Spiked bumper upon exposure to cold. Hereditary factors, exposure to steady while cutting. When cutting, push the machine are all thought to contribute to the development of these by moving the rear handle up or down in the direction of the cutting line it can help ease the physical strain of cutting Keep your body warm in cold weather.
  • Page 9 Ryobi service centre. The part number WARNING is available in the product specification table in this manual.
  • Page 10 repaired or replaced by an authorized service centre. For damaged parts Before each use REPLACING GUIDE BAR AND SAW CHAIN For loose fasteners Before each use See page 21 - 22. Before each use gloves. Inspect and clean Before each use Complete saw After each use chain from unit.
  • Page 11 CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION Without safety alert symbol Indicates a situation that may result in property damage. Rotate to adjust chain tension + = Tighten the chain Moving direction of the chain.
  • Page 12 RCS36X3550HI...
  • Page 13 RCS36B35...
  • Page 17 3-4 mm...
  • Page 21 p.17 p.18 p.19 p.20 p.20 p.21...
  • Page 22 p.23 p.24 p.25 p.26...
  • Page 23 5 cm (2 inch) 5 cm (2 inch)
  • Page 28 3-4 mm...
  • Page 29 3-4 mm...
  • Page 33 93.6 dB(A) at operator’s position Uncertainty of measurement 2.5 dB A-weighted sound power level 104.6 dB(A) Uncertainty of measurement 2.5 dB BATTERY AND CHARGER Model RCS36X3550HI RCS36B35 Battery pack BPL3650D Not included Weight 1.4 kg Charger BCL3620 Not included Compatible battery...
  • Page 36 Techtronic Industries (Australia) Pty. Ltd. Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd.

Table of Contents