Paradyne 3162 Quick Reference page 23

Table 15. Management and Communication – SNMP Traps
Configuration Options
Option
SNMP Traps SNMP Traps:
Number of Trap Number of Tra
Managers:
NMS n IP Address: NMS n IP Address:
Destination: Destination:
General Traps: General Traps:
Enter rise S ecific Enterprise Specific
Traps:
Link Traps: Link Traps:
Link Tra Interfaces: Link Trap Interfaces:
Factory 1
Enable
Disable
1
2–6
[Text Field]
Clear
None
Com
FDL
EDLn
Disable
Warm
AuthFail
Both
Enable
Disable
Disable
Up
Down
Both
Network
DTE
T1s
Ports
All
Factory 2
Enable
Disable
1
2–6
[Text Field]
Clear
None
Com
FDL
EDLn
Disable
Warm
AuthFail
Both
Enable
Disable
Disable
Up
Down
Both
Network
DTE
T1s
Ports
All
21
Comments/Description
Specifies whether SNMP traps are
sent over the SNMP management t th SNMP
link.
The number of trap managers The number of tra managers
supported by the device.
Specifies the IP address for each
tra manager. This configuration trap manager. This configuration
option is repeated for all n
managers.
S ecifies the network destination Specifies the network destination
for Trap Manager n.
Specifies the general trap types to
enable: WarmStart, Authentication bl W St t A th
Failure or both.
Specifies whether the
enterpriseSpecific traps are t i S ifi t
enabled.
Specifies the link trap type to
Enable: Trap on Link Up, Link E bl T Li k U
Down, or both. ,
When any link trap types are When any link trap types are
Enabled, specifies which links to
send traps for. d t f
t
ti ti
Li k