Paradyne 3162 Quick Reference page 13

Table 3. Synchronous Data Port Configuration Options (1 of 2)
Option
Port Type: Port Type:
Port Base Rate: P t B R t
Transmit Clock Transmit Clock
Source:
Embedded Data Embedded Data
Link:
EDL Management EDL Management
Link:
Invert Transmit
Cl Clock: k
Invert Transmit and Invert Transmit and
Received Data:
Send All Ones on
Data Port Not D t P t N t
Ready: y
Action on Network
Yellow Alarm: Y ll Al
Network Init. Data Network Init. Data
Channel Loopback:
Factory 1
E530
V.35
RS449
X.21
Nx64
Nx56
Internal
External
Enable
Disable
Disable
Enable
Enable
Disable
Enable
Disable
Disable
DTR
RTS
Both
None
Halt
Disable
V.54
FT1
Both
Factory 2
E530
V.35
RS449
X.21
Nx64
Nx56
Internal
External
Enable
Disable
Disable
Enable
Enable
Disable
Enable
Disable
Disable
DTR
RTS
Both
None
Halt
Disable
V.54
FT1
Both
11
Comments/Description
Selects the port type: EIA-530A, Selects the port type: EIA-530A,
V.35, RS449, or X.21.
Enables the ort to either Nx56 or Enables the port to either Nx56 or
Nx64 rates.
Selects whether the transmitted
data clock is internal (TXC) or d t l k i i t l (TXC)
external (XTXC).
Specifies whether the Embedded S ecifies whether the Embedded
Data Link is enabled.
S ecifies whether the EDL Specifies whether the EDL
Management Link is Enabled.
Selects hase inversion of the Selects phase inversion of the
transmit clock (TXC).
Allows the data on the port to be Allows the data on the ort to be
inverted.
All ones sent to network (DTE) T1 All ones sent to network (DTE) T1
when DTR or RTS interrupted.
Data port remains enabled, or is
di disabled, on receiving Yellow on bl d i i
network T1.
Network-initiated DCLB, allows
DCLB DCLB to be controlled by inband b ll d b i b
V.54 or FT1 (ANSI) codes. ( )
Y ll
,
d