Paradyne 3162 Quick Reference page 18

Table 7. User Interface – Communication Port Configuration Options (2 of 2)
Option
Disconnect Time: Disconnect Time:
Table 8. User Interface – External Device Configuration Options
Option
External Device
Commands: Commands:
Dial-In Access: Dial In Access:
Connect Prefix: Connect Prefix:
Connect Indication Connect Indication
String:
Escape Sequence: Escape Sequence:
Esca e Sequence Escape Sequence
Delay (sec):
Disconnect String: Disconnect String:
Factory 1
5
Up
Down
Save
Factory 1
Disable
AT
Other
Enable
Disable
[Text Field]
Clear
[Text Field]
Clear
[Text Field]
Clear
None
0.2
0.4
0.6
0.8
1.0
[Text Field]
Clear
Factory 2
5
Up
Down
Save
Factory 2
Disable
AT
Other
Enable
Disable
[Text Field]
Clear
[Text Field]
Clear
[Text Field]
Clear
None
0.2
0.4
0.6
0.8
1.0
[Text Field]
Clear
16
Comments/Description
Specifies the period of inactivity
(1 to 60 minutes) that causes a (1 to 60 minutes) that causes a
disconnect if Inactivity Timeout is
enabled. enabled.
Comments/Description
Controls whether no commands, Controls whether no commands,
AT commands, or
user-configurable commands are user-configurable commands are
sent out the COM port.
Controls whether dial-in access is
allowed from the external device allowed from the external device
connected to the COM port.
Allows you to enter up to
20 characters to be used with the 20 characters to be used with the
dial directory phone number.
Allows you to enter up to
20 characters used to determine 20 characters used to determine
whether a connection has been
established.
Allows you to enter up to
20 characters to identify the COM 20 characters to identify the COM
port's escape sequence.
Specifies the delay in seconds
required before and after the required before and after the
user-defined escape sequence.
Allows you to enter up to
20 characters to be used as the 20 characters to be used as the
COM port's disconnect string.
q