Table of Contents
Advertisement
Installation instructions
3. Secure the anti-tip device using the screws
as shown in the picture.
4. Attach the plastic cups for mounting the
tumble dryer's front feet to the washing
machine's top cover. This is essential, as only
when the tumble dryer's feet are resting in the
plastic cups can you be sure that the tumble
dryer is correctly positioned on the washing
machine.
Break off tab A on the cup fitted on the right
side and tab B on the cup fitted on the left
side. Then remove the paper from the self-
adhesive surface under the plastic cups.
A
B
5. Fit the plastic cups so that the "tags" marked
with arrows are against the front edge or side
edge of the cover and press them firmly onto
the cover. Then break off the remaining tabs.
22
6. Push out the knock-out hole on the back
of the tumble dryer (you don't have to
completely remove the knockout, just fold
it up far enough for the stacking bracket to
fit inside the slot) using a hammer and a
screwdriver.
7. Push the tumble dryer in under the metal
brackets. At the same time keep the front
edge raised by 7/16" (10mm) to 7/8" (20mm).
8. Lower the tumble dryer's front feet into the
plastic cups and adjust the tumble dryer to
ensure it is level.
Customer Care Center
1-800-898-1879
www.askona.com
Advertisement
Table of Contents
