Table of Contents
Advertisement
NOTICE
Condensation in the device
Damage to device through formation of condensation if the temperature difference between
transportation or storage and the mounting location exceeds 20 °C (36 °F).
• Before taking the device into operation, let the device adapt for several hours in the new
Note
Electromagnetic compatibility (EMC)
You can use this device in industrial environments, households and small businesses.
Metal enclosures ensure improved electromagnetic protection from high frequency radiation.
This protection can be increased by grounding the enclosure.
See also
Basic safety notes (Page 61)
Note
Improvement of interference immunity
• Lay signal cables separate from cables with voltages > 60 V.
• Use cables with twisted wires.
• Keep device and cables at a distance from strong electromagnetic fields.
• Take account of the conditions for communication specified in the Technical specifications
(Page 77).
• Use shielded cables to guarantee the full specification according to HART/PA/FF/Modbus/
EIA-485/Profibus DP.
6.3
Nameplate layout
Each FSS100 Ultrasonic flowmeter sensor has a nameplate showing the following information:
• product identification
• product specifications
• certificates and approvals
Note
Identification
Identify your device by comparing your ordering data with the information on the product
and specification nameplates.
SITRANS FSS100
Installation Manual, 12/2023, A5E52595000-AA
environment.
Connecting
6.3 Nameplate layout
65
Advertisement
Table of Contents
