Proper Mounting - Siemens SITRANS FSS100 Installation Manual

Installing/mounting
5.2 Basic safety notes
NOTICE
Direct sunlight
Damage to device.
The device can overheat or materials become brittle due to UV exposure.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. Refer to
NOTICE
Strong vibrations
Damage to device.
• In installations with strong vibrations, mount the device in a low vibration environment.
5.2.3

Proper mounting

Incorrect mounting at Zone 0
Risk of explosion in hazardous areas.
• Ensure sufficient tightness at the process connection.
• Observe the standard IEC/EN 60079-14.
NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are used.
• Mount the device using suitable tools. Refer to the information in Technical specifications
30
the information in Technical specifications (Page 77).
WARNING
(Page 77).
Installation Manual, 12/2023, A5E52595000-AA
SITRANS FSS100