Connecting FCU KIT
•
Connect DC power cable connector (Blue) to CN12 of FCU KIT MAIN PBA.
•
Communication cable (Red) is ring type. Connect the cable to F1, F2 terminal of FCU KIT MAIN PBA.
FCU interface module
F1
CAUTION
•
You should separate power cable and communication cable of FCU KIT. (Abnormal operation of the product may occur
due to the electric problem.)
•
communication FCU KIT.
•
You should be aware that power may not be supplied to FCU KIT and interface module if power polarity of V1 and V2
is connected opposite.
•
Terminal block of upper level controller connection on FCU interface module has to be tightened by M3 size screw,
and the torque is 0.5 ~ 0.75 N.m.
Connect with upper level controller
12V
F2
FCU KIT
5