Sony DCX-930 Operating Instructions Manual page 34

White balance adjustment errors
If white balance adjustment has not been done
successfully, one of the following error messages appears
on the monitor screen for about 4 seconds. Take the
necessary action.
ee iT oD UAT
on ee TRIG Bd veneees
<i wed er
WHITE: NG
C.TEMP: LOW
a a n et : eh data bite
The video level was too low.
Take one or more of the following actions and
then press the WHITE button again.
© Make the illumination brighter.
© Widen the iris opening.
¢ Increase the video gain.
The camera failed to adjust the white balance.
Take one or both of the following actions and
then try again.
© Get any very bright highlights out of the
screen.
e Adjust the illumination.
If this message appears again and again, itis
necessary to have the internal circuitry
checked by qualified personnel.
The color temperature was too low.
Change the C.TEMP setting in the menu to
§600K and try again. (See Chapter 4.)
The color temperature was too high.
Change the C.TEMP setting in the menu to
3$200K and try again. (See Chapter 4.)
The current WHT.BAL setting in the menu is
MANU.
Change the WHT.BAL setting to AUTO.
(See Chapter 4.)
Chapter 3 Shooting
Chapter 3
3-7(E)