Advertisement
Available languages
Available languages
Chapter
2
|
Connecting to Video Equipment Having a
Composite Video Input
To connect the camera to video equipment having a
appropriate camera adaptor:
composite video input connector, use the VIDEO OUT
® CMA-D2 camera adaptor fur the DXC-930
connector. To supply power to the camera, use an
® CMA-D2MDCE camera adaptor for the DXC-930P,
Video monitor, VTR. etc.
75-ohm coaxial cable
to composite video input
|.
|
§ to VIDEO OUT
to DC IN/REMOTE
=
to AC
Set the MODE selector
outlet
to the "1° position.
to
CAMERA
(4 pin)
CCDC-5/10/25/50A/100A cable
ODXC-930/930P video camera
Connections using the VIDEO OUT connector (CCDC cable)
Note on use of camera adaptors
the DXC-930/930P does not allow two camera units to be
connected to a single adaptor at a time. Be sure to use one
Although the
CMA-D2/D2CE/D2MDCE camera adaptor
camera adaptor for each DXC-930/930P unit.
has two DC output connectors, the power consumption of
2-4(E) | Chapter 2 installation
Advertisement
