Advertisement
Available languages
Available languages
Connecting to V Video Equipment Having R/G/B or
S-video Inputs
rr
SS
Camera cable:
:
* CCXC-9DB (with D-SUB 9-pin and BNC connectors), or
mB input
VIE 1000 NIOINIOF,
¢ CCMC-9DS (with D-SUB 9-pin, BNC and S-video
connectors)"
image processor, etc.
to G input
to B input
to sync input?)
to RGB/SYNC
Chapter
2
7
to composite video (BNC)
of S-video input (4-pin)"
CCXC-9DD camera cable
(with 0-SUB 9-pin connectors)
CMA- D2/D2CE/D2MDCE ¢ camera adaptor
to DC IN/REMOTE
CCDC-5/10/25/50A/100A cable
Set the MODE selector
to the "1" position.
to CAMERA (4 pin)
Connections using RGB/SYNC connector
1) To connect separated Y and C signals to the S-video input
2) When using a video monitor without sync signal input connector,
connector of the video equipment, use a CCMC-9DS camera cable,
you can make the camera output a sync-added G signal (G.SYNC).
For switching the camera output between VBS (composite video)
For details, see page 4-11(E).
and Y/C, see page 4-11(E).
2-6(E) | Chapter 2 Installation
Advertisement
