Sony DCX-930 Operating Instructions Manual page 12

Chapter 1
Locations and Functions of Parts
@ RGB/SYNC (RGB/sync signal output) connector
Outputs RGB signals and a sync signal for them. Use a
CCXC- 9DB/CCXC-9DD/CCMC-9DS cable for
connection.
Pin assignment ®©@OOO0
®2OC®@
I a
| GND | 7 | S¥NCouput__
[a | Repowt |e | en
[4 | GREEN outpot |
fs | aiveounut |
1-6(E) | Chapter 1 tatroduction
@ GEN LOCK (reference sync signal input)
connector
To make the camera operate in synchronization with a
reference sync signal, input that signal to this connector.
@ DC IN/REMOTE (DC power input/remote control)
connector
Connect a CMA-D2/D2CE/D2MDCE camera adaptor (not
supplied) to this connector.
© Use the CMA-D2 if your camera is the DXC-930.
® Use the CMA-D2CE if your camera is the DXC-930P for
non-medical use.
© Use the CMA-D2MDCE if your camera is the DXC-930P
for medical use.
This connector is also to be used for connection of an
RM-930 remote control unit (not supplied)
@ VIDEO OUT (composite video signal output)
connector
The camera signal is output from this connector in the
form of a composite signal.