Operating The Product; Use Of Your Appliance; Temperature Adjustment Button - Indesit IT60 732 W User Manual

• N: Temperate Climate: This cooling
device is designed for use at ambient
temperatures between 16°C and 32 °C.
• ST: Subtropical Climate: This cooling
device is designed for use at ambient
temperatures between 16°C and 38°C.

7 Operating the Product

Read the "Safety Instructions" sec-
tion first!
• Do not use any mechanical tools or any
other tools than the recommendations of
the manufacturer to speed up the defrost
operation.
• Do not use parts of your refrigerator such
as the door or drawers as a support or a
step. This may cause the product to trip
over or its components to be damaged.
• The product shall be used for storing
food only.

8 Use of Your Appliance

8.1 Temperature Adjustment Button

Internal temperature of your refrigerator
changes because of the reasons men-
tioned below:
• Season temperatures,
• Opening the door frequently and leaving
it open for a long time,
• The meals that are placed in the refriger-
ator in a hot state without being reduced
to the room temperature,
• The location of the refrigerator in the
room (like being exposed to the sun heat)
You can adjust the internal temperature
which changes due to these reasons via ad-
justment knob.
The numbers around the adjustment knob
show temperature degrees as "°C".
If the ambient temperature is 25°C, it is re-
commended to use the temperature adjust-
ment knob of the refrigerator at the posi-
tion of 4°C. At other ambient temperatures,
this value can be increased or decreased
according to the needs.
• T: Tropical Climate: This cooling device
is designed for use at ambient temperat-
ures between 16°C and 43°C.
• Turn off the water valve if you will be
away from home (e.g. at vacation) and
you will not be using the Icematic or the
water dispenser for a long period of time.
Otherwise, water leaks may occur.
Unplugging the Product
• If you are not going to use the product for
a long time, unplug the product from the
socket.
• Remove the food to prevent odours,
• Wait for the ice to melt, clean the interior
and let it dry, leave the doors open to
avoid damaging the inner body plastics.
Snow melting
During cooling process of your refrigerator,
water droplets and frost deposit up to 7-8
mm thickness occur on the internal rear
wall of the cooler compartment. This devel-
opment is normal according to the cooling
system.
Thanks to the automatic melting system
available on the internal rear wall, the snow
developing in the cooler compartment is
melted at certain intervals. For this reason,
the user does not need to scrape the snow
and clean the water droplets.
EN / 17
EN
FR
ES
IT