Installing The Hotwire Adsl/R Bridge/Router - Paradyne Hotwire 6381 Install Manual

Installing the Hotwire ADSL/R Bridge/Router

Place the router on a flat surface with clearance for the rear connectors.
Procedure
1.
UNPLUG TELEPHONE. If a telephone is connected at
the RJ11 wall jack where the router will be installed,
unplug the telephone cable from the wall jack.
2.
RECONNECT TELEPHONE.
(Optional. Go to
connecting a telephone to the router.)
Plug the existing telephone cable that was
unplugged in
PHONE. The router has a built-in filter, so
no filter is required on this phone.
3.
CONNECT DSL LINE. Use the supplied
RJ11 telephone cable for the ADSL/R line
connection. Insert one end of the cable into
the jack labeled LINE. Insert the other end
of the cable into the RJ11 wall jack.
Step 3 if you are not
Step 1 into the jack labeled
4
RJ11
Wall Jack
PHONE