Table of Contents
Advertisement
About the Bluetooth Status and Battery Icons
Bluetooth Status Icon
About the Bluetooth Status Icon
The blue Bluetooth Icon LED has two behaviors flash and on. The icon will flash
when linking to a device then will remain on, indicating the base and scanner are
linked and stays on when the scanner is in base.
Once the scanner is removed from base, the blue LED stays on for four seconds
then turns off.
Note: Link status can be checked by holding the trigger for three seconds, the BT LED will
stay on for four seconds when BT is linked.
About the Battery Status Icon
The Battery status icon displays the charged level of the battery. Low-power alerts
are non-configurable. See the table below to learn more about low power
indicators.
Scanner LED
Yellow 3 sets of flashes
48
Scanner Beep
No beep
Battery Status Icon:
Charge Level
<15%
Granit XP User Guide
Advertisement
Table of Contents
