Honeywell Granit XP 199xi Series User Manual page 21

1. Turn off power and disconnect the keyboard cable from the back of the termi-
2. Connect the appropriate interface cable to the device and to the terminal/
Note: The power supply must be ordered separately, if needed.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a barcode from the
The unit defaults to an IBM PC AT and compatibles keyboard wedge interface with
a USA keyboard. A carriage return (CR) suffix is added to barcode data.
Granit XP User Guide
nal/computer.
computer.
Corded Granit XP Scanner Keyboard Wedge Connection:
CCB22-100BT-03N Base Keyboard Wedge Connection:
Sample Symbols, beginning on page 289.
5