Table of Contents
Advertisement
Notes on the POWER lamp
• The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal.
• If the POWER lamp does not light, set the selector to the center position and disconnect the power
cord. After about one minute, reconnect the power cord and set the selector to VTR (DC OUT) again.
To Remove the Adaptor
The adaptor is removed in the same way as the battery pack (p. 8).
Using a Car Battery
Use the DCP-77 DC pack (not supplied). Connect the cord of the DC pack to the cigarette lighter socket
of a car (12 V or 24 V). Connect the DC pack to the battery mounting surface of the camcorder.
To Remove the DC Pack
The DC pack is removed in the same way as the battery pack (p. 8).
This mark indicates that this product is a genuine product related to our 8mm video
equipment.
When purchasing our 8mm video equipment, we recommend that you purchase
related 8mm video products provided with the same mark or products provided
with our logotype mark.
Advertisement
Table of Contents
