Table of Contents
Advertisement
Hints for Better Shooting
Place the camcorder on a flat surface or use a tripod
Try placing the camcorder on a table top or any other flat surface of suitable height. If you have a
tripod for a still camera, you can also use it with the camcorder.
If the camcorder is difficult to balance on a tripod, use the supplied adaptor. You can attach a tripod to
the adaptor,
[c]
Do not leave the tripod adaptor on the camcorder if the camcorder is not mounted on a tripod.
When attaching a non-Sony tripod, make sure that the length of the tripod screw is less than 9/32
inches (6.5 mm). Otherwise, the screw may damage the inner parts of the camcorder.
You can use the stand on the bottom to place the camcorder on a table when recording in a low
position,
[d]
Cautions on the viewfinder and the LCD
• Do not pick up the camcorder by the viewfinder or by the LCD panel,
[e]
• Do not place the camcorder so as to point the viewfinder or the LCD screen toward the sun. The
inside of the viewfinder or the LCD panel may be deformed. Be careful when placing the camcorder
under sunlight or by the window,
[f]
16
Advertisement
Table of Contents
