Turning The Tv On; Tv Operation Overview - Zenith L15V26D Installation, Setup & Operating Manual

Turning the TV On

TV Operation Overview

TV Operation Overview
First, connect antenna cable and power cord correctly. At this moment,
1
the TV is switched to standby mode.
In standby mode, press the
remote control or
fully.
2 Select the viewing source by pressing
Note: See page 25 if you have not auto programmed the TV to receive channels in
your local broadcast area.
3
After viewing, press the
the TV side panel. The TV screen goes dark and it reverts to standby
mode.
W atching TV Programs
W atching TV Programs
1 Press power
2
Use the channel (
Adjust Volume level.
3
Volume ( G ) button increases the sound level.
Volume ( F ) button decreases the sound level.
- If you will be away on vacation, disconnect the power plug from the wall power
outlet.
22
power ,
( D,E ),
ch tv/video
power button on the remote control or
on the remote control to turn the TV on.
D,E
) or number buttons to select a channel to view.
( D,E ),
ch tv/video or number buttons on the
or on/off on the TV side panel to turn it on
tv/video repeatedly.
Volume
on/off on
45