Pc Mode Functions Check - Zenith L15V26D Installation, Setup & Operating Manual

PC Mode Functions Check

- After setup, be sure to select PC source to see the PC image on TV screen.
1 Use the menu
Contrast
Brightness
H-position
V-position
Clock
Phase
Auto configure
Reset
DE Move F G
H-position/V-position
Adjusts picture left/right and up/down.
The adjustment ranges of H-Position is -100~+100.
(Based on the input mode, the adjustment range may change.)
Clock
Minimizes any vertical bars or stripes appearing on the screen background.
The adjustment range is 0~80. (Based on the input mode, the adjustment range may change.)
Phase
Remove any horizontal noise and clear up or sharpen the character images.
The range adjustment is 0~31. (Based on the input mode, the adjustment range may change.)
Auto-configure
Automatically adjusts the screen position, clock, and clock phase.
(The displayed image will disappear for a few seconds while Auto-configuration is in progress.)
Reset
Returns to the default settings programmed at the factory; default settings
cannot be changed.
button to display the available menu shown below.
80
60
0
0
40
16
Adjust Menu
21