IBM Selectric I/O Reference Manual page 73

Keyboardless printer
Hide thumbs Also See for Selectric I/O:
Table of Contents

Advertisement

2.
Black Shift Magnet - With the black shift magnet arma-
ture energized and the red shift magnet armature de-en-
ergized, position the black shift magnet for a clearance
of .010
11
between the black and red shift armatures (Fig.
199).
o
Black Shift Magnet
Red Shift Magnet
FIGURE
199.
Magnet Positioning
NOTE:
With the red shift armature energized and the
black shift armature de-energized, the black shift arma-
ture must overthrow the red shift armature by .003
11
to
.006" (Fig. 200).
Assembly Bracket
((5;)
.003" to .005"
'f
Overthrow
Adj. ScreVY'S
o
o
FIGURE 200.
Black Shift Armature Overthrow
3.
Magnet Adiustments (1 Magnet) (Fig. 201) - With the
red shift magnet armature energized, position the hinge
plate and armature stop so that the armature clears the
yoke (both inner and outer poles) by .003" to .005" •
• 003"
Ajrmature
.t~0311
.005"
Mtg. Screw
Hinge Plate
Yoke
FIGURE 201.
Magnet Adjustments (1 Magnet)
4.
Pivot Arm (Fig. 202) - With the manual ribbon lift lever
in the black position, form the pivot arm extension (up
or down) so that the latch does not drag when moved from
the latched to the unlatched position.
NOTE:
Position the pivot arm bracket so that the high-
est and lowest characters print equi distant from the top
and bottom of the red portion of a black and red ribbon.
\
l"}~)
7
ft··
-.-.~..
--
Pivot Arm
.. ,v
~
Cam Follower Latch
Form to Prevent
'Q/
latch Drag
FIGURE 202.
Pivot Arm
5.
Right Hand Pu Iley (Fig. 203
&
204) - With the red shift
armature energized, position the right hand pulley pivot
to obtain .002" to .005" clearance between the stud
and follower latch slot.
Pulley
Pivot
FIGURE 203.
Right Hand Pulley
~-+---
Follower Latch
Stud
Cam Follower Latch
FIGURE
204.
Cam Follower Latch
NOTE:
The pulley nut must be loosened before adjust-
i ng the pi vot screw.
6.
Red Shift Armature Backstop (Fig. 205
&
206) - With the
armature de-energized, position the red shift armature
backstop to obtain .002" to .005" clearance between the
stud and the follower latch slot.
2-58
Red Shift Armature
(De-Energized)
FIGURE 205.
Red Shift Armature Backstop
FIGURE 206.
Cam Follower Latch

Advertisement

Table of Contents
loading

Table of Contents