7 Adjustment
7.1. Matrix Chart for Replaced Part and Necessary Adjustment
The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
Replaced Part
DECORATION RING (*1)
DUST PROOF RING (*1)
FILTER RING (*1)
SHADING FRAME
L MOUNT UNIT
REAR FRAME UNIT
OIS SWITCH
LENS MOUNT CONTACT UNIT
FLOATING RUBBER
LENS P.C.B.
ZOOM DRIVE PIN
RING MOUNT BASE UNIT
WAVE WASHER
1ST LENS HOLDER
DIRECT FRAME SHADING SHEET
2ND LENS FRAME2 UNIT
3RD LENS FRAME3 UNIT
5TH LENS FRAME2 UNIT
CAM BARREL1 UNIT
*1 NOTE:
In the case of replacing a single part in the scratches or damage, the adjustment is not necessary.
7.2. Matrix Chart for Cleaning Portion and Necessary Adjustment
The relation Cleaning portion and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
Cleaning Portion
Outside
surface of the Lens
Inside
surface of the Lens
Necessary Adjustment
Electrical
1st Lens Frame
Adjustment
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
Necessary Adjustment
Electrical
1st Lens Frame
Adjustment
- - -
1
Adjustment
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
Adjustment
- - -