Twin Picture - Zenith C32V37 Installation And Operating Manual

Twin Picture

Twin Picture splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same
time. Each source is given half the screen.
Watching Twin Picture
1
Press the PIP button on the remote control in POP mode to activate twin picture mode.
Select the Analog or DTV option on the Sub input menu or with the PIP INPUT button.
Use the PIPCH-/PIPCH+ button to select a channel for the sub picture.
2 Press the EXIT button to exit twin picture mode.
Swapping Screen
Press the Swap button.
Each time you press SWAP, you switch the PIP and Main screen channels.
Main Picture
Adjusting Sub Picture Size
Use the UP/DOWN/LEFT/RIGHT arrow button to adjust main and sub picture
size in twin Picture mode.
Selecting an Input Signal Source for Sub Picture
Use the PIP INPUT button to select the input source for the sub picture.
Each time you press PIP INPUT, you toggle between DTV, Analog, Video 1,
Video 2, Video 3, and Front Video.
206-03890
Sub Picture
P A G E 2 9