Tv Turn On Time Setup - Zenith C32V37 Installation And Operating Manual

TV Turn On Time Setup

Lets you set an automatic daily turn on time for your TV.
Off timer function overrides on timer function if they are
both set to the same time.
Unless a button is pressed within two hours after the TV
is turned on by the On Timer function, the TV will auto-
matically turn off.
TV must be in standby mode for the On Timer to work.
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the Time menu.
Press the RIGHT arrow button to activate
2
the Time menu.
Use the UP/DOWN arrow button to choose
3
On Timer, then press the RIGHT arrow
button.
Use the UP/DOWN arrows to choose On,
4
then press the RIGHT arrow button.
Use the LEFT/RIGHT arrow button to
5
select either Time, Channel, or Volume.
Once selected, use the UP/DOWN arrow
button to set either the Time, Channel, or
Volume options.
Press EXIT button to return to TV viewing
6
or press MENU button to return to the
previous menu.
To cancel On Timer function, use the
UP/DOWN arrow button to select Off in
step 4.
P A G E 4 0
5
1/6
1/3/4/5
tv vcr cable dvd sat
mode light power
tv/video front comp/dvi
ratio signal freeze
1 2 3
4 5 6
7 8 9
0
dash(-) flashbk
mute surf
audio video
vol ch
pip pipch- pipch+ pip input
timer cc
info swap
menu exit
play
pause stop record
rew
ff
skip
1/3/4/5
2/3/4/5
6
206-03890