Channel Label Setup - Zenith C32V37 Installation And Operating Manual

Channel Label Setup

Choose preset labels for your channels.
Use Channel +/- on your remote control in the CH Label
menu to select a channel for labeling, and choose a suit-
able label for your channel by pressing
to the selected channel.
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the Setup menu.
Press the RIGHT arrow button to access
2
the Setup menu.
Use the UP/DOWN arrow button to select
3
CH.Label and then press the RIGHT arrow
button.
4 You will now see a screen filled with
Labels and a preview screen. Use channel
UP/DOWN button on your remote control
to select the a channel to Label.
Use the UP/DOWN and LEFT/RIGHT arrows
5
to select the appropriate label for the
channel and press
the selected channel.
Repeat 4 and 5 steps until all channels
6
are Labeled.
Press EXIT button to return to TV viewing
7
or press MENU button to return to the
previous menu.
The TV displays a short name for a DTV
channel even if you didn't preset a label
for the channel.
P A G E 2 4
to set the label
to set the Label to
tv
tv/video
mute
audio
5
5
1/7
1/3/5
vcr cable dvd sat
mode light
power
front comp/dvi
ratio signal freeze
1 2 3
4 5 6
7 8 9
0
dash(-) flashbk
surf
video
vol ch
pip pipch- pipch+ pip input
timer cc
info swap
menu exit
play stop record
pause
rew ff
skip
4
1/3/5
2/3/5
7
206-03890