Using The Grip Ring With Led Light; Notes On Working With Materials/Tools/Speed Range - Parkside 385113 2107 Translation Of The Original Instructions

Using the grip ring with LED light

♦ Unscrew the union nut
thread .
♦ Screw the grip ring with LED
the screw thread .
♦ Move the ON/OFF switch of the LED light
the position "I" to switch it on (see fig . C) .
♦ Move the ON/OFF switch of the LED light
the position "O" to switch it off again .
Notes on working with materials/
tools/speed range
■ Use the milling bit for working on wood, plastics
and plasterboard at maximum speed .
■ Calculate the rotational speed range for working
on zinc, zinc alloys, aluminium, copper and
lead by trying it out on test pieces .
■ Use a low rotational speed for work on plastics
and materials with a low melting point .
■ Use a high rotational speed for working on
wood .
Select suitable accessories for the appropriate rotational speed
WARNING!
■ Never exceed the specified maximum rotational speed!
Speed
control
MAX
5
4
3
2
Metal brush
synthetic brush
1
0
■ 64 │ GB │ MT
anticlockwise off the
clockwise onto
to
to
Accessories
Polishing attach-
/
ments
■ Carry out cleaning, polishing and buffing work
in the middle range .
NOTE
► The milling bit
iron . Suitable products are available in stores .
The following are recommendations only and not
binding . When carrying out practical work, carry
out your own tests to see which tool and which
settings are ideal for the material you are working
on .
Set a suitable rotational speed
Number on the
speed control
1
2–3
4
5
Max.
Cutting disc
grinding wheel
abrasive belts
milling bits
engraving bits
grinding bits
/drills
cutting discs
is not suitable for steel or
Material being worked
Plastics and materials
with a low melting point
Stone, ceramics
Soft wood, metal
Hardwood
Steel
Speed
40000 rpm
/
/
/
/
/
0 rpm
PFBS 160 B2