Hook Up Antenna And Vcr To The Tv - Zenith A27B43 Operating Manual

P A G E 8 I N S TA L L AT I O N

Hook Up Antenna and VCR to the TV

Connect your
off-air
antenna and
VCR to your
1
Entertainment
Machine.
2
3
4
S TA N DA R D
See diagrams at right to hook up
your Entertainment Machine.
Remove the back of the remote
and put in three AAA batteries.
back of remote
Plug in your TV. Do not plug it
into a switched outlet.
120V
60Hz
Go to page 13 to Auto Program
your Entertainment Machine.
Remember, when screwing
RF cables onto jacks, clockwise
tightens, and counterclockwise
loosens.
Use Video sources for better
picture and sound.
No A/V cables are included with
your Zenith Entertainment
Machine.
Without A/V cables, VCRs will not
play videocassettes in stereo
sound.
Flat-Wire Antenna to Adapter and Audio/Video Cables
Antenna
Flat wire
(300 ohm)
300/75 ohm
Adapter
TV back
TV back panel
(expanded view)
Round Cable to VCR and Audio/Video Cables
Antenna
Round wire (75ohm)
TV back
TV back panel
(expanded view)
VCR back
VCR back AV panel
output
In
switch
Audio
Out
R-L Out
RF coaxial wire
(75ohm)
not included
with TV
A/V cables
not included
with TV
VCR back
VCR back AV panel
output
In
switch 3 4
Audio
Video
Out
R-L Out
Out
RF coaxial wire
(75 ohm)
not included
with TV
A/V cables
not included
with TV
3 4
Video
Out
3376-O