Toshiba Carrier MMU-UP0151YHP-UL Service Manual page 40

DN Item
33
Temperature unit select
External static pressure
High-ceiling adjustment
5d
(Air flow selection)
Timer setting
60
(wired remote controller)
77
Dual set point
Alarm output setup of the
79
header unit
Change unit 0.9°F(0.5°C)
7A
or 1.8°F(1°C) on remote
b3
Soft cooling
Occupancy sensor/
b5
Wireless Remote controller
Provided / None
Occupancy sensor
Enable / Invalid
b6
(Absence time judgment
time)
Occupancy sensor
b7
operation at absent time
Whether the power
d0
saving mode can be set
by the remote controller
Destination
E0
Wireless remote
E6
controller A-B selection
Presence of Application
F6
control kit
(TCB-PCUC2E)
FC
Communication protocol *2
Priority operation mode
Fd
(FS unit)
FS unit address
FE
Description
0000: °C
Refer to next page.
0000: Available
(can be performed)
0000: Unavailable
0000: Not including the state
of following unit
0000: 1.8°F(0.5°C)
0000: Unavailable
0000: None
0002: Wireless remote controller provided
0000: Invalid
0002: 60min.
0005: 150min.
0000: Stand by
0000: Invalid
0000: Domestic
0000: A
0000: None
0000 TCC-LINK
0000: Heating
0001: No.1 unit to 0064: No.64 unit
0001: No.1 unit to 0128: No.128 unit ... TU2C-LINK
00Un: Unfixed (When using U series remote controller)
0099: Unfixed (Other than U series remote controller)
- 40 -
0001: °F
0001: Unavailable
(cannot be performed)
0002: Available
0001: Including the state of
following unit
0001: 0.9°F(1°C)
0001: Available
0001: Occupancy sensor
provided
0001: 30min.
0004: 120min.
0001: operation stop
0001: Valid
0001: North America
0001: B
0001: Exist
0003:TU2C-LINK
0001: Cooling
... TCC-LINK
At shipment
0001: °F
Depending on model
type
0000: Available
0000: Unavailable
0000: Not including the
state of following
unit
0001: 0.9°F(1°C)
0001: Available
0000: None
0002: Enable
(60 min.)
0000: Stand by
0001: Valid
0001: North America
0000: A
0000: None
0000: TCC-LINK
0000: Heating
00Un/0099: Unfixed *1