Toshiba Carrier MMU-UP0151YHP-UL Service Manual page 105

No. Part name
5 Louver
1. Detachment
1) Open the louver until the end (1) then slide the
2) Pull the louver shaft A off from the shaft holder of
3) Close the louver (4) then pull the louver off from
2. Attachment
1) Insert the louver hole into the louver motor shaft
2) Open the louver (2) and slide in direction of
3) Slide the louver to opposite direction (4) then
Make sure that the plus shape of louver
motor shaft completely matches with the
plus shape of louver hole.
Louver motor shaft
Procedure
louver in direction of arrow 2 until the end. (Fig. 6)
ceiling panel then slide the louver to opposite
side (3) and pull another shaft off. (Fig. 6)
the louver motor both side in direction of arrow 5
(1 side at a time) (Fig. 7)
in direction of arrow 1 (1 side at a time) (Fig. 8)
arrow 3 until the end then push the louver shaft
A into the shaft holder of ceiling panel. (Fig. 9)
push another shaft to shaft holder (Fig. 9)
CAUTION
Louver hole
Plus shape must be match direction before mounting
(Fig. 6)
Louver
(Fig. 7)
(Fig. 8)
(Fig. 9)
Louver
- 105 -
Remarks
Louver shaft
Shaft holder
3
1
2
Shaft A
5
4
Louver motor shaft
Louver hole
1
1
Louver shaft
Shaft holder
4
2
3
Shaft A
5