Table of Contents
Advertisement
Operation
Scanning for a desired index marker
Skipping to a desired index marker
This function scans through the tape, playing back a
This function moves the tape directly to an index
section from each index marker.
marker specified by count.
1 Count the number of index sections between the
current position and the desired index marker in
the following way.
To skip back from the current position: Count
the current section as |. For example, the
second section back is counted as 3.
To skip forward from the current position:
Count the following section as 1. For example,
the second section forward is counted as 2.
Current position
Skipping back
.<+—>
——™.._
Skipping forward
18th
2nd
;
2nd
| 3rd_
19th
section\\
| section |Previous} Current |Following] section | section
back
back
{section | section
[section | forward]
forward
Number of
section
forward
sections
19
3
2
1
1
2
3
You can specify a skip count of 2 to 39.
To move to the immediately previous or following
1 With the SVO-9500MD/9500MDP in the
index marker, use the index scan function.
playback, stopped or paused state, press the
INDEX button.
The INDEX indicator on the SVO-9500MD/
9500MDP flashes.
2 To scan back from the current position: Press
the REW button.
To scan forward from the current position:
Press the F FWD button.
The SVO-9500MD/9500MDP scans through the
tape, stopping at each index marker and playing
back for approximately 10 seconds.
To stop the scan at a particular point
Press any tape transport button other than F FWD
or REW.
The scan ends, and the INDEX indicator on the
SVO-9500MD/9500MDP goes off.
When a scan reaches the beginning or end of the tape,
the SVO-9500MD/9500MDP automatically ends the
scan.
8
Advertisement
Table of Contents
