Sony SVRM-100A Operating Instructions Manual page 5

Remote control unit
Table of Contents

Advertisement

© PAUSE!Ibutton
Press to stop the tape momentarily.
@ REW<<(rewind) button
Press to rewind the tape.
In the index search function (SVO-9500MD/
9500MDP), pressing this button winds back by a
number of index markers corresponding to the number
of times you pressed the INDEX button O (see page
8).
© PLAY> button
Press to play the tape back.
Pressing the REC@button 6 while holding down this
button starts recording.
@ F FWDP> (fast forward) button
Press to fast forward.
In the index search function (SVO-9500MD/
9500MDP), pressing this button moves forward by a
number of index markers corresponding to the number
of times you pressed the INDEX button @ (see page
8).
© INDEX button (for SVO-9500MD/9500MDP)
Press this button to initiate an index search operation.
The SVO-9500MD/9500MDP enters the index scan
mode, the INDEX indicator on the SVO-9500MD/
9500MDP flashes, and the unit begins to scan through
the index markers. If you press this button twice or
more, the SVO-9500MD/9500MDP enters skip search
mode and the INDEX indicator lights continuously.
The unit then skips through the index markers,
counting a number of markers corresponding to the
number of times you pressed the button.
© MARK button (for SVO-9500MD/9500MDP)
Press to write an index marker on the tape.
@ ERASE button (for SVO-9500MD/9500MDP)
Press to erase an index marker written on the tape.
@ JOG/SHUTTLE button/indicator
Press to play the tape in jog/shuttle mode. The
indicator lights and the recorder or player enters jog/
shuttle mode.
Press any tape transport button to return to the normal
operating mode.
@ Search dials
Clockwise rotation plays the tape in the forward
direction and the counterclockwise rotation plays it in
the reverse direction.
Shuttle dial (outer): The speed of playback is
determined by the position of the dial, in the range
from —16 to +16 times normal speed. When the
shuttle dial is in its center position, a still image is
obtained.
Jog dial (inner): The speed of playback is determined
by the speed of turning the dial, in the range from
—2 to +2 times normal speed.
The jog dial only operates when the shuttle dial is
in its center position.
The speed ranges in jog and shuttle modes may depend on
the type of recorder or player connected. Refer to the
operating instructions for the recorder or player.
5
mI

Advertisement

Table of Contents
loading

Table of Contents