Table of Contents
Advertisement
Transmitting
For convenience, you can program up to ten facsimile or voice telephone numbers into 10 DIRECT
CALL stations.
The following method will let the unit dial and transmit a single document automatically.
Load the document.
programmed with the facsimile telephone
37 i
|? |»
|* |
Push the DIRECT CALL station that was
C )
{P CD
C
number that wish to transmit to.
eThe unit will dial, and then start
transmission automatically.
elf you are sending two or more pages, insert the
next page before the end of the four beeps.
eTo stop transmission, push the STOP/CLEAR
button.
To fill in the memory card with station names
for one-touch transmission, refer to page 1-10.
Automatic Redialing
When the line is busy, the unit will automatically redial the number up to 6 times within 10-minute
period.
NOTE:
If you dial the wrong number, push the STOP/CLEAR button, and then start all over again.
When dialing with manual operation, automatic redialing is not performed.
1-7
Advertisement
Table of Contents
