Assembling The Phone - Yealink T22P Manual

Enterprise IP Phone

Assembling the Phone

This section introduce how to assemble the phone with the components in the packing
list：
Attach the stand;

Connect Handset and Headset;

Connect Network and Power.

1) Attach the Stand, as shown below:
2) Connect Handset and Headset, as shown below:
Note:
Headset is not provided in the packing list. Please contact your distributor for more
information.
3) Connect Network and Power
There are two ways for network and power source connections. You can either connect
the phone to the AC Power directly using the power adapter or to a PoE compliant
switch or hub. Your system administrator will advise you on which one to use.
- 3 -
Getting Started
Stand attached