Yealink T22P Manual page 27

Enterprise IP Phone
To add a contact via Phone interface:
1) Press Dir->Local Directory
2) Choose a group, and press the Enter hot key.
3) Press Add hot key, enter Name, Office, Mobile, Other and Account options of the
contact by the keypad. Use the abc hot key to select between numeric and
upper/lower case alphanumeric modes.
4) Use the navigation keys to select the desired account as Line if you want to assign
the contact to a specific account.
5) Choose and set a special ring tone for the contact.
6) Use the navigation keys to select the group which you want to assign.
7) Press Save hot key to add the contact or Back hot key to cancel the change.
To edit a contact via Phone interface:
1) Press Dir->Local Directory
2) Choose a group, and press the Enter hot key.
3) Use the navigation key to highlight the one you want to edit, press Option->Detail,
enter to the edit interface.
4) And then make the changes, press Save hot key to save the changes, or press Back
hot key to return to the directory.
To delete a contact via Phone interface:
1) Press Dir->Local Directory
2) Choose a group, and press the Enter hot key.
3) Use the navigation key to highlight the one you want to delete, press Option hot key,
and scroll to Delete, press OK hot key.
4) It will pop up a warning frame asking whether confirm to delete the contact.
5) Press OK hot key to confirm the operation, or press the Cancel hot key to return to
the directory.
Using the Basic Call Functions
- 22 -