User Interface - Yealink T22P Manual

Enterprise IP Phone

User Interface

There are two ways to customize specific options on your phones:
1. Using keypad and display on the phone;
2. Using Web user interface in an Internet browser from your PC; please refer to
"Configuration and Registration" to get into the Web interface.
In many instances, it is possible to use both the user interfaces to operate the phone
and change settings; some, however, are only possible via a phone or web user
interface. Please refer to the following table for differences:
Phone Options
Status
--IP
--MAC
--Firmware
--Network
--Phone
--Accounts
Call Features
Input Method: multi-lingual letters in upper case
Call mute
Call hold
Voicemail
SMS
Call forward
DND(Do Not Disturb)
Auto answer
In handset mode
In headset mode
In speaker mode
The recording session cannot be started
The recording cannot be stopped
Probably the recording box is full
This call cannot be recorded.
The recording session is successfully started
Using the Basic Call Functions
Phone UI
√
- 10 -
Web UI
√