Advertisement
2 SETUP
6
–
Mount the left handguard.
–
Mount the right handguard.
Info
Observe the accompanying KTM PowerParts fitting
instructions.
S05478-01
–
Remove the start number plate. (
–
Join all plug-in connectors.
–
Route the cables without tension and secure with the cable
ties.
–
Install the start number plate. (
F03861-01
–
Mount the handlebar pad.
S05479-01
–
Position the new footpeg and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.
G05756-10
p. 11)
p. 12)
Advertisement
