Advertisement
2 SETUP
8
–
Remove the seat. (
–
Connect the positive cable
Guideline
Screw, battery termi-
nal
–
Connect negative cable
Guideline
Screw, battery termi-
nal
Contact disks
cable sockets
nal.
–
Slide positive terminal cover
–
Charge the 12-V battery. (
Guideline
The 12 V battery must be fully charged before it is handed
over to the customer.
S05483-10
Info
The first charging process may take longer with a new
12 V battery.
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Observe the accompanying KTM PowerParts fitting
instructions.
–
Attach the stickers included in the scope of supply (optional).
–
Refuel. (
p. 19)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
In order to be able to start the motorcycle, the transport
lock must be deactivated.
p. 12)
9
to the 12 V battery.
M5
2.5 Nm
(1.84 lbf ft)
bk
to the 12 V battery.
M5
2.5 Nm
(1.84 lbf ft)
C
must be mounted under screws
bm
with the claws toward the battery termi-
bn
over the positive terminal.
p. 16)
bl
and
Advertisement
