Advertisement
3 WORK
3.5
3.6
12
Installing the start number plate
S05337-10
Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
S05350-10
S05390-01
–
Position the brake line in holders
plate.
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
–
1
Remove screw
.
–
Raise seat, pull it toward the fuel tank and take it off.
A
on the start number
1
.
Advertisement
