Advertisement
3.4
Removing the start number plate
Adjusting the handlebar position with the handlebar clamp
–
Place the handlebar support in the required position.
Info
The handlebar support is longer and higher on one
side.
–
Mount and tighten the screws
Guideline
Screw, handle-
bar support
Rigid handlebar support bushing (A46001038010)
The conical side of bushing faces downwards.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
F03781-10
–
Position handlebar clamp
–
Mount screws
–
First bolt the handlebar clamp with screws
longer, higher side of the handlebar supports so that both
parts touch.
–
Tighten screws
Guideline
Screw, handlebar
clamp
Finishing work
–
Mount the handlebar cushion.
–
Remove screw
–
Unhook the start number plate from the brake line and remove
it.
S05336-10
7
with the bushings
M10
40 Nm (29.5 lbf ft)
2
.
1
, but do not tighten yet.
1
evenly.
M8
20 Nm
(14.8 lbf ft)
1
. Swivel the start number plate to one side.
WORK 3
8
.
Loctite
®
243™
1
onto the
11
Advertisement
