The Store Function; Storing An Edited Voice - Yamaha VL70-m Owner's Manual

The Store Function

84
The Store Function
Once you've created a new voice in the edit mode, it's necessary to store the
voice to one of the VL70-m INTERNAL memory locations otherwise the edited
data will be lost when a new voice is selected.
NOTES
• Any previous data in the memory location to which the new voice is stored will be
erased. If you want to keep the previous data, save it to an external MIDI data storage
device via the UTILITY mode DUMP OUT function (page 100).
• The STORE function is not available in the VL-XG sound module mode.

Storing an Edited Voice

The STORE function mode can be accessed from the VOICE PLAY mode
as follows:
1. Press [EDIT]
Press the [EDIT] button to go to the EDIT sub-mode menu.
2. Select the STORE Sub-mode
Use the SELECT [<] and [>] buttons to select the STORE sub-mode, if
necessary. The icon to the left of "STORE" on the display will flash when
the STORE sub-mode is selected.
3. Press [ENTER]
Press the [ENTER] button to go to the STORE function. "Store Voice" will
appear at the top of the display along with the flashing number of the
currently selected INTERNAL voice number.
4. Select a Destination Voice Number
Use the VALUE [-] and [+] buttons to select the number of the INTERNAL
memory location you want to store the edited voice to (I01" through "I64").