Voice Selection; Selecting & Playing The Vl7'S 64 Voices - Yamaha VL-7 Owner's Manual

Voice Selection

Selecting & Playing the VL7's 64 Voices
One of the first things you'll want to do with your VL7 is select and
play some of its voices ... this section will show you how to do just that.
1.
Select the Play Mode
Press the P button so that its indicator lights and the word "PLAY" appears in
the upper left corner of the LCD panel.
A considerable amount of information appears on the play-mode display in addition
to the name of the currently selected voice. Many of the functions relating to this
information will be covered later in the manual. For now, here are the basics:
Play mode.
Element name: Alto Sax 1.
Assign Mode: Last Note
The abbreviations in the section separated by a line at the bottom of the display
("Cnt1", "Cnt2", etc) indicate the functions of the corresponding function buttons
below the display: ¡ through •. These will be discussed later in this section.
Getting Started Voice Selection
Voice name: Alto Sax 1 (A14: [FULLCNT1:All]).
34
Reverb is ON.
Stereo output mode.
Effects in use: Pitch Change,
Feedback Delay off and
Studio type reverb.